Live Roller Conveyor zero pressure

MEDIUM DUTY  

190-E24EZ and 190-E24EZC Models - 24VDC Live Roller Conveyor (EZLogic®)

• BED (E24EZ)—Roller bed with 1.9 in. dia. roller x 16 ga. galvanized tube bearings spaced every 3 in. Mounted in 6 1/2 in x 12 ga. powder painted formed steel channel frame bolted together with splice plates.
• BED (E24EZC)—Roller bed with 2 1/2 in. dia tapered to 1 11/16 in. dia. x 14 ga. galvanized. Mounted in 6 1/2 x 12 ga. powder painted formed steel channel frame.
• MOTOR—24 VDC motor with integrated motor control card. One in each zone of conveyor mounted on inside of BR.
• ACCUMULATION ZONES—18 in., 24 in., 30 in., and 36 in. zones available.
• CONVEYING SPEED—25-125 FPM, set on integrated motor control card.
• CAPACITY—Maximum load 37 lbs. per foot, 75 lbs. per zone.

190-E24EZSS Model - Live Roller Straight Spur 

• BED–Roller bed with 1.9 in dia. roller x 16 ga. galvanized tube. Mounted in 6 ½ in. 12 ga. powder painted formed steel channel frame.
• SLAVE DRIVEN– Spurs are driven from power supply of Model 190-E24 conveyor. 45° spur has (1) 24 VDC motor with integrated motor control card, 30° spur has (1) 24 VDC motor with integrated motor control card on 12"-16" OAW, and (2) VDC motor with integrated motor control card on 18"- 42" OAW. Motors mounted on the inside of the B.R.
• OVERALL FRAME WIDTH: 12” 14” 16” 18” 20" 22" 24" 26" 28" 30" 34" 36" 40" 42"
• ACCUMMULATION ZONES–1 per spur with zone controller (retro-reflective)
• Optional: HIGH SPEED DRIVE SPOOL–Provides a speed range of 50-200 FPM Capacity affected with speed change.
• Available in 30° or 45° spur
• Right hand or left hand

190-NSPEZ Model - Right section line shaft

• BED— Roller bed with 1.9in. dia. rollers x 16ga. Galvanized tube with ABEC-1 bearings spaced every 3 in. mounted in 8-1/2 in x 12 ga. Powder painted formed steel channel frame bolted together with butt couplings. BELT— 45MM wide polyurethane thermoplastic with aramid cords and endless splice.
• OVERALL FRAME WIDTH: 18" 24" 30" 36" 42"
• SPEED RANGE— 51 – 275 FPM
• ACCUMULATION ZONES— 24 and 36 in. long electrically actuated. Note: Over 50 zones require an additional IOP, isolation cable and power supply T cable.
• CAPACITY— Maximum load per zone 75 lbs.

190-NSPEZC Model -  Curve  line shaft (EZLogic®)

• BED–Roller bed with 2 1/2 in. dia. tapered to 1 11/16 in. dia. x 14 ga. galvanized and 1.9 in. dia. roller x 16 ga. galvanized tube. Mounted in 9 1/2 in. x 12 ga. powder painted formed steel channel frame.
• SLAVE DRIVEN–Curves and spurs are slave driven from drive shaft of Model 190-NSPEZ conveyor. Shafts are coupled by chain coupling at bed joints.
• OVERALL FRAME WIDTH: 12” 14” 16” 18” 20" 22" 24" 26" 28" 30" 34" 36" 40" 42"
• ACCUMULATION ZONES–24 in. long air controlled. 2 per curve.
• CAPACITY–Maximum load see capacity chart below.

190-E24SS Model - 24 VDC Live Roller Straight Spur

• BED–Roller bed with 1.9 in dia. roller x 16 ga. galvanized tube. Mounted in 6 ½ in. 12 ga. powder painted formed steel channel frame.
• SLAVE DRIVEN– Spurs are driven from power supply of Model 190-E24 conveyor. 45° spur has (1) 24 VDC motor with integrated motor control card, 30° spur has (1) 24 VDC motor with integrated motor control card on 12"-16" OAW, and (2) VDC motor with integrated motor control card on 18"- 42" OAW. Motors mounted on the inside of the B.R.
• OVERALL FRAME WIDTH : 12” 14” 16” 18” 20" 22" 24" 26" 28" 30" 34" 36" 40" 42"
• ACCUMMULATION ZONES–1 per spur with zone controller (retro-reflective)
• Optional: HIGH SPEED DRIVE SPOOL–Provides a speed range of 50-200 FPM Capacity affected with speed change.

ABEZ Model - Right section belt driven

• BED–Roller bed with 1.9 in. dia. roller x 16 ga. galvanized tube spaced every 3 in. Mounted in 6 1/2 in. x 12 ga. powder painted formed steel channel frame bolted together with butt coupling.
• OVERALL FRAME WIDTH: 18" 20" 22" 24" 26" 28" 30" 34" 36" 40" 42"
• ACCUMULATION ZONES–12, 18, 24, 30 and 36 in. long air controlled. Includes 4 brake rollers to stop package. Section lengths change with zone lengths. (See Note opposite page). Note: 51 or more zones will require an additional IOP, isolation cable and power supply T cable.
• MOTOR–1/2 HP–208/230/460/575V–3 Ph. 60 Hz. Totally Enclosed C-Face.
• CONVEYING SPEED–Constant 65 FPM.
• CAPACITY–Maximum load per linear foot of conveyor 150 lbs. Total load NOT TO EXCEED capacity in charts.

NBEZ Model - Right section belt driven

• BED— Roller bed with 1.9in. dia. rollers x 16ga. Galvanized tube with ABEC-1 bearings spaced every 3 in. mounted in 8-1/2 in x 12 ga. Powder painted formed steel channel frame bolted together with butt couplings.
• BELT— 45MM wide polyurethane thermoplastic with aramid cords and endless splice
• OVERALL FRAME WIDTH: 18" 24" 30" 36" 42"
• ACCUMULATION ZONES— 24 and 36 in. long electrically actuated. Note: Over 50 zones require an additional IOP, isolation cable and power supply T cable.
• CAPACITY— Maximum load per zone 75 lbs.

NBEZA Model - Right section belt driven

• BED— Roller bed with 1.9 in. dia. Rollers x 16 ga. Galvanized tube with ABEC-1 bearings spaced every 3 in. Mounted in 8-1/2 in. x 12 ga. Powder painted formed steel channel frame bolted together with butt couplings. BELT— 45MM wide polyurethane thermoplastic with aramid cords.
• OVERALL FRAME WIDTH: 18" 24" 30" 36" 42"
• SPEED RANGE— 51 – 275 FPM
• ACCUMULATION ZONES— 24, and 36 in. long pneumatically actuated. Note: Over 50 zones require an additional IOP, isolation cable and power supply T cable.
• CAPACITY— Maximum load per zone 75 lbs.

HEAVY DUTY 

25 LREZ Model - Right section belt driven 

• BED–Roller bed with 2 1/2 in. dia. x 11 ga. unplated tread rollers spaced every 3 in. and 1.9 in. dia. x 16 ga. unplated pressure rollers spaced every 6 in. Mounted in 7 1/2 in. x 10 ga. powder painted formed steel channel frame. Bolted together with butt coupling.
• BELT–14 in. black Ultimate 140 SD.
• Overall Frame Width 42" 44" 46" 48" 50" 52" 54" 64"
• ACCUMULATION ZONES–3 in. roller centers, 30 in. to 72 in. on 3 in. increments. 4 in. roller centers, 32 in. to 72 in. on 4 in. increments. 6 in. roller centers, 30 in. to 72 in. on 6 in. increments. Minimum length of infeed zone (drive) is 60 in. Frame length changes with zone length.
• MOTOR–1 HP–208/230/460/575V–3 PH. 60 Hz. Totally Enclosed C-Face.
• CONVEYING SPEED–Constant 30 FPM.
• CAPACITY–Maximum load per linear foot of conveyor 1000 lbs. Maximum unit load 4000 lbs. Total load NOT TO EXCEED capacity in charts